County soil summary
Soil types in Ector County, Texas
The most widespread soils are Kimbrough, Conger and Ratliff; the most common drainage class is well drained (84% of the land), and typical topsoil pH is 7.9.
- Well or moderately well drained
- 88% of land · state 88%
- Typical topsoil pH
- 7.9 moderately alkaline · state 7.5
- Septic fields very limited
- 56% of land · state 71%
- Subject to flooding
- <1% of land, any frequency · state 10%
Most common soils in Ector County
Share of mapped land
A county is a patchwork of many soils. These 8 cover 81% of the mapped land; 22 named soil series are mapped here in all.
| Soil | Share of land | Drainage | Topsoil pH |
|---|---|---|---|
| Kimbrough | 18.4% | Well drained | 7.8 |
| Conger | 14.4% | Well drained | 8.2 |
| Ratliff | 11.8% | Well drained | 8.2 |
| UnnamedGeneral soil group, not a named series | 9.8% | — | — |
| Faskin | 8.7% | Well drained | 7.2 |
| Reagan | 7.6% | Well drained | 8.2 |
| Stegall | 5.6% | Well drained | 7.5 |
| Douro | 4.7% | Well drained | 7.6 |
What this means
What the soils in Ector County mean for gardens, lawns and septic systems
For your garden
Typical topsoil in Ector County is moderately alkaline: pH 7.9 (most land between 7.2 and 8.2). Acid-loving plants such as blueberries and azaleas struggle without amended beds, and some trees and shrubs show iron chlorosis (yellow leaves with green veins).
Loamy topsoil (loam, silt loam and similar) covers 77% of the land: generally the easiest soil to garden, holding moisture without staying waterlogged. The most common surface texture is loam (46% of the land).
88% of the land is moderately well to excessively drained, which suits most garden plants.
For your lawn and yard
On 51% of the land, rain soaks in slowly (hydrologic groups C and D, including dual groups that are D until drained). Expect runoff and puddles after heavy rain: core-aerate compacted lawns and keep ground sloping away from foundations.
For a septic system
For conventional septic absorption fields, NRCS rates 56% of the land in Ector County very limited, 34% somewhat limited and <1% not limited (10% not rated, such as urban land, pits or water).
Statewide, 71% of the land is very limited, so Ector County is less restrictive than typical.
Where the soil is very limited (slow permeability, a high water table, flooding, shallow bedrock or steep slopes), alternative systems such as mound or sand-filter designs are common and cost more.
Only a licensed site evaluation or perc test at the actual lot decides whether a system is allowed and which design.
Drainage
How long the soil stays wet
The most common drainage class is well drained (84%). 88% of the land is moderately well drained or better, compared with 88% across Texas.
Show as a table
| Category | Ector County | Texas |
|---|---|---|
| Excessively drained | 3.7% | 1.0% |
| Somewhat excessively drained | 0.0% | 1.4% |
| Well drained | 84.2% | 69.9% |
| Moderately well drained | 0.0% | 15.8% |
| Somewhat poorly drained | 0.4% | 3.7% |
| Poorly drained | 0.0% | 2.2% |
| Very poorly drained | 0.0% | 0.5% |
| Not rated | 11.7% | 5.6% |
Septic absorption fields
NRCS rating for conventional drain fields
The rating looks at the soil from 24 to 60 inches deep: permeability, depth to a seasonal water table or bedrock, flooding and slope. “Very limited” means at least one feature is unfavorable enough that a conventional field is hard to make work.
Show as a table
| Category | Ector County | Texas |
|---|---|---|
| Not limited | 0.4% | 1.4% |
| Somewhat limited | 34.0% | 16.7% |
| Very limited | 55.8% | 70.9% |
| Not rated | 9.8% | 11.0% |
Rain, runoff and water table
Hydrologic soil group, flooding, seasonal water table
Hydrologic soil group
How fast rain soaks in when the soil is already wet. Group A soaks in fastest, D slowest.
Show as a table
| Category | Ector County | Texas |
|---|---|---|
| A: fast infiltration (mostly sandy or gravelly) | 4.9% | 7.2% |
| B: moderate infiltration | 34.6% | 20.0% |
| C: slow infiltration | 10.2% | 22.9% |
| D: very slow infiltration (clayey, shallow or wet) | 40.6% | 38.3% |
| A/D: D as is, A if drained | 0.0% | 0.1% |
| B/D: D as is, B if drained | 0.0% | 0.8% |
| C/D: D as is, C if drained | 0.0% | 1.8% |
| Not rated | 9.8% | 8.8% |
Flooding
Show as a table
| Category | Ector County | Texas |
|---|---|---|
| No flooding | 90.2% | 86.1% |
| Rare or very rare | 0.0% | 2.1% |
| Occasional | 0.0% | 3.4% |
| Frequent or very frequent | 0.1% | 4.6% |
| Not reported | 9.8% | 3.7% |
Seasonal high water table
Show as a table
| Category | Ector County | Texas |
|---|---|---|
| Within 18 inches at some time of year | 0.4% | 5.7% |
| 18 inches to 3.3 feet | 0.0% | 3.6% |
| Deeper than 3.3 feet or none reported | 99.6% | 89.0% |
| Not reported | 0.0% | 1.6% |
Topsoil pH and texture
First mineral layer of each soil
Typical topsoil pH is 7.9 (moderately alkaline); 80% of rated land falls between 7.2 and 8.2. Median topsoil organic matter is 1.4%.
Show as a table
| Category | Ector County | Texas |
|---|---|---|
| Strongly acidic (below 5.5) | 0.0% | 5.2% |
| Moderately to slightly acidic (5.5–6.4) | 0.0% | 9.8% |
| Near neutral (6.5–7.3) | 23.8% | 24.9% |
| Alkaline (7.4 and up) | 64.5% | 46.8% |
| Not reported | 11.7% | 13.3% |
Texture
Show as a table
| Category | Ector County | Texas |
|---|---|---|
| Sandy | 11.1% | 14.6% |
| Loamy (loam, silt loam and similar) | 76.8% | 56.0% |
| Clayey (40%+ clay) | 0.4% | 15.9% |
| Organic (muck or peat) | 0.0% | 0.1% |
| Not reported (rock, urban land, etc.) | 11.7% | 13.4% |
Sources & data dates
- Source
- USDA NRCS Soil Survey Geographic Database (SSURGO), queried through Soil Data Access. Public domain.
- Data date
- SSURGO as published on November 3, 2026 (most recent survey area update October 26, 2026). NRCS refreshes SSURGO each October.
- Scope
- Ector County, Texas (FIPS 48135): 577,985 acres of mapped land, 153 acres of open water excluded. State comparisons pool all mapped land in Texas.
- Method
- Shares are by mapped land area: each map unit’s acres in the county times each soil component’s percentage. Open water is excluded. Topsoil values use the first mineral horizon of each component. Full methodology.