Soil series profile

Dalvord soil series

Dalvord is a somewhat excessively drained soil with a extremely gravelly sandy loam surface, mapped on 188,225 acres in 2 counties in CA. Hydrologic group D.

#1945 by mapped area loamy-skeletal Lithic Torriorthents (Entisols)

Drainage class: Somewhat excessively drained
Hydrologic group: D
Typical topsoil pH: 8.0
Mapped area: 188k

Typical Dalvord profile

Texture and pH by depth

Depth to scale. More strongly shaded layers hold more clay. Horizon names are the soil survey's (A = topsoil, B = subsoil, C = parent material).

Show as a table

Typical Dalvord horizons (representative values)
Depth	Texture	pH	Clay	Sand	Organic matter
0–2 in (A)	Extremely gravelly sandy loam	8.2	7%	70%	0.3%
2–13 in (Bk)	Extremely gravelly sandy loam	8.2	10%	70%	0.15%
13–23 in (R)	Bedrock	Not reported	Not reported	Not reported	Not reported

Representative values from the most extensive Dalvord map unit (Dalvord-Rock outcrop complex, 15 to 50 percent slopes, survey area CA795). Other map units of this series vary within the series range.

Stock photo for illustration, not a sample of this soil series. Credit on the Sources & method page.

What this means

What Dalvord soil means for gardens, lawns and septic systems

For gardens

Typical topsoil in Dalvord soils is moderately alkaline: pH 8.0 (most land between 7.2 and 8.2). Acid-loving plants such as blueberries and azaleas struggle without amended beds, and some trees and shrubs show iron chlorosis (yellow leaves with green veins).

Loamy topsoil (loam, silt loam and similar) covers 59% of mapped Dalvord acres: generally the easiest soil to garden, holding moisture without staying waterlogged. The most common surface texture is extremely gravelly sandy loam (80% of mapped Dalvord acres).

72% of mapped Dalvord acres is excessively or somewhat excessively drained: water moves through fast, so gardens need more frequent watering in dry spells.

For lawns and yards

On 97% of mapped acres, rain soaks in slowly (hydrologic groups C and D, including dual groups that are D until drained). Expect runoff and puddles after heavy rain: core-aerate compacted lawns and keep ground sloping away from foundations.

For a septic system

For conventional septic absorption fields, NRCS rates 97% of the acres in mapped Dalvord soils very limited, 0% somewhat limited and 0% not limited (3% not rated, such as urban land, pits or water).

Where the soil is very limited (slow permeability, a high water table, flooding, shallow bedrock or steep slopes), alternative systems such as mound or sand-filter designs are common and cost more.

Only a licensed site evaluation or perc test at the actual lot decides whether a system is allowed and which design.

Generated from the mapped numbers above using fixed rules, not a site visit. See how these notes are written.

Where Dalvord soil is found

Mapped acres

Dalvord is mapped in California.

Counties with the most mapped Dalvord soil
County	Acres	Share of county land
San Bernardino County, CA	182,902	3.4%
Riverside County, CA	961	0.0%

Septic absorption fields

NRCS rating, share of Dalvord acres

Not limited 0%

Somewhat limited 0%

Very limited 97%

Not rated 3%

Septic tank absorption field rating across mapped Dalvord acres. Scale 0 to 100% of mapped land.

Show as a table

Septic tank absorption field rating across mapped Dalvord acres.
Category	Share of acres
Not limited	0.0%
Somewhat limited	0.0%
Very limited	97.3%
Not rated	2.7%

Drainage, water table and flooding

Share of Dalvord acres

Depth to seasonal high water table: None reported within about 6.5 feet (median where reported).
Flooding: Not mapped as flooding on most acres.
Slope: Typically 24–48% (median 37%).
Topsoil organic matter: Median 0.2%.

Drainage class

Excessively drained 0%

Somewhat excessively drained 72%

Well drained 25%

Moderately well drained 0%

Somewhat poorly drained 0%

Poorly drained 0%

Very poorly drained 0%

Not rated 3%

Drainage class across mapped Dalvord acres. Scale 0 to 100% of mapped land.

Show as a table

Drainage class across mapped Dalvord acres.
Category	Share of acres
Excessively drained	0.0%
Somewhat excessively drained	72.3%
Well drained	25.0%
Moderately well drained	0.0%
Somewhat poorly drained	0.0%
Poorly drained	0.0%
Very poorly drained	0.0%
Not rated	2.7%

Hydrologic soil group

A: fast infiltration (mostly sandy or gravelly) 0%

B: moderate infiltration 0%

C: slow infiltration 0%

D: very slow infiltration (clayey, shallow or wet) 97%

A/D: D as is, A if drained 0%

B/D: D as is, B if drained 0%

C/D: D as is, C if drained 0%

Not rated 3%

Hydrologic soil group across mapped Dalvord acres. Scale 0 to 100% of mapped land.

Show as a table

Hydrologic soil group across mapped Dalvord acres.
Category	Share of acres
A: fast infiltration (mostly sandy or gravelly)	0.0%
B: moderate infiltration	0.0%
C: slow infiltration	0.0%
D: very slow infiltration (clayey, shallow or wet)	97.3%
A/D: D as is, A if drained	0.0%
B/D: D as is, B if drained	0.0%
C/D: D as is, C if drained	0.0%
Not rated	2.7%

Sources & data dates

Source: USDA NRCS Soil Survey Geographic Database (SSURGO), queried through Soil Data Access. Public domain.
Data date: SSURGO as published on November 3, 2026 (most recent survey area update October 26, 2026). NRCS refreshes SSURGO each October.
Scope: All map unit components named Dalvord (component kind "Series") in SSURGO: 188,225 acres.
Method: Shares are by mapped acres of Dalvord components. The profile comes from the single largest Dalvord component. Full methodology.

Independent reference site. No government affiliation or endorsement.

Full narrative description: USDA Official Soil Series Description for Dalvord.