County soil summary
Soil types in Blount County, Tennessee
The most widespread soils are Ramsey, Dewey and Dandridge; the most common drainage class is well drained (65% of the land), and typical topsoil pH is 5.0.
- Well or moderately well drained
- 91% of land · state 85%
- Typical topsoil pH
- 5.0 very strongly acidic · state 5.3
- Septic fields very limited
- 73% of land · state 82%
- Subject to flooding
- 9% of land, any frequency · state 15%
Most common soils in Blount County
Share of mapped land
A county is a patchwork of many soils. These 8 cover 48% of the mapped land; 89 named soil series are mapped here in all.
| Soil | Share of land | Drainage | Topsoil pH |
|---|---|---|---|
| Ramsey | 14.0% | Somewhat excessively drained | 5.0 |
| Dewey | 10.1% | Well drained | 5.3 |
| Minor soilsGeneral soil group, not a named series | 4.6% | — | — |
| Dandridge | 4.6% | Excessively drained | 7.0 |
| Tellico | 3.9% | Well drained | 5.0 |
| Ditney | 3.8% | Well drained | 4.6 |
| Sequoia | 3.6% | Well drained | 5.0 |
| Junaluska | 3.5% | Well drained | 4.8 |
What this means
What the soils in Blount County mean for gardens, lawns and septic systems
For your garden
Typical topsoil in Blount County is very strongly acidic: pH 5.0 (most land between 4.5 and 6.2). Most vegetables and lawn grasses do best around 6.0 to 7.0, so lime is often needed; blueberries, azaleas and rhododendrons like it as it is.
Loamy topsoil (loam, silt loam and similar) covers 88% of the land: generally the easiest soil to garden, holding moisture without staying waterlogged. The most common surface texture is loam (17% of the land).
91% of the land is moderately well to excessively drained, which suits most garden plants.
For your lawn and yard
Most land is in hydrologic groups B and C, where rain soaks in at a moderate pace.
For a septic system
For conventional septic absorption fields, NRCS rates 73% of the land in Blount County very limited, 19% somewhat limited and 0% not limited (9% not rated, such as urban land, pits or water).
Statewide, 82% of the land is very limited, so Blount County is less restrictive than typical.
Where the soil is very limited (slow permeability, a high water table, flooding, shallow bedrock or steep slopes), alternative systems such as mound or sand-filter designs are common and cost more.
Flooding is mapped on 9% of the land (5% occasional, <1% frequent).
Only a licensed site evaluation or perc test at the actual lot decides whether a system is allowed and which design.
Drainage
How long the soil stays wet
The most common drainage class is well drained (65%). 91% of the land is moderately well drained or better, compared with 85% across Tennessee.
Show as a table
| Category | Blount County | Tennessee |
|---|---|---|
| Excessively drained | 6.0% | 2.0% |
| Somewhat excessively drained | 16.4% | 11.6% |
| Well drained | 64.7% | 57.1% |
| Moderately well drained | 3.7% | 14.7% |
| Somewhat poorly drained | 0.1% | 4.5% |
| Poorly drained | 0.9% | 4.2% |
| Very poorly drained | 0.0% | 0.1% |
| Not rated | 8.2% | 5.9% |
Septic absorption fields
NRCS rating for conventional drain fields
The rating looks at the soil from 24 to 60 inches deep: permeability, depth to a seasonal water table or bedrock, flooding and slope. “Very limited” means at least one feature is unfavorable enough that a conventional field is hard to make work.
Show as a table
| Category | Blount County | Tennessee |
|---|---|---|
| Not limited | 0.0% | 0.1% |
| Somewhat limited | 18.7% | 12.7% |
| Very limited | 72.5% | 81.9% |
| Not rated | 8.8% | 5.3% |
Rain, runoff and water table
Hydrologic soil group, flooding, seasonal water table
Hydrologic soil group
How fast rain soaks in when the soil is already wet. Group A soaks in fastest, D slowest.
Show as a table
| Category | Blount County | Tennessee |
|---|---|---|
| A: fast infiltration (mostly sandy or gravelly) | 8.9% | 9.9% |
| B: moderate infiltration | 38.5% | 39.3% |
| C: slow infiltration | 17.1% | 19.3% |
| D: very slow infiltration (clayey, shallow or wet) | 24.7% | 13.2% |
| A/D: D as is, A if drained | 0.2% | 0.0% |
| B/D: D as is, B if drained | 1.3% | 5.7% |
| C/D: D as is, C if drained | 0.4% | 6.4% |
| Not rated | 8.9% | 6.2% |
Flooding
Show as a table
| Category | Blount County | Tennessee |
|---|---|---|
| No flooding | 84.2% | 80.3% |
| Rare or very rare | 3.8% | 1.4% |
| Occasional | 5.3% | 8.5% |
| Frequent or very frequent | 0.3% | 5.0% |
| Not reported | 6.4% | 4.8% |
Seasonal high water table
Show as a table
| Category | Blount County | Tennessee |
|---|---|---|
| Within 18 inches at some time of year | 1.0% | 12.1% |
| 18 inches to 3.3 feet | 3.4% | 10.5% |
| Deeper than 3.3 feet or none reported | 89.2% | 73.0% |
| Not reported | 6.4% | 4.4% |
Topsoil pH and texture
First mineral layer of each soil
Typical topsoil pH is 5.0 (very strongly acidic); 80% of rated land falls between 4.5 and 6.2. Median topsoil organic matter is 2%.
Show as a table
| Category | Blount County | Tennessee |
|---|---|---|
| Strongly acidic (below 5.5) | 62.1% | 58.1% |
| Moderately to slightly acidic (5.5–6.4) | 22.0% | 26.3% |
| Near neutral (6.5–7.3) | 7.1% | 9.3% |
| Alkaline (7.4 and up) | 0.0% | 0.1% |
| Not reported | 8.7% | 6.2% |
Texture
Show as a table
| Category | Blount County | Tennessee |
|---|---|---|
| Sandy | 0.1% | 0.7% |
| Loamy (loam, silt loam and similar) | 87.5% | 91.8% |
| Clayey (40%+ clay) | 3.6% | 1.3% |
| Organic (muck or peat) | 0.0% | 0.0% |
| Not reported (rock, urban land, etc.) | 8.7% | 6.2% |
Sources & data dates
- Source
- USDA NRCS Soil Survey Geographic Database (SSURGO), queried through Soil Data Access. Public domain.
- Data date
- SSURGO as published on November 3, 2026 (most recent survey area update October 26, 2026). NRCS refreshes SSURGO each October.
- Scope
- Blount County, Tennessee (FIPS 47009): 351,353 acres of mapped land, 5,750 acres of open water excluded. State comparisons pool all mapped land in Tennessee.
- Method
- Shares are by mapped land area: each map unit’s acres in the county times each soil component’s percentage. Open water is excluded. Topsoil values use the first mineral horizon of each component. Full methodology.