County soil summary
Soil types in Hamilton County, Tennessee
The most widespread soils are Fullerton, Bodine and Lily; the most common drainage class is well drained (59% of the land), and typical topsoil pH is 5.0.
- Well or moderately well drained
- 85% of land · state 85%
- Typical topsoil pH
- 5.0 very strongly acidic · state 5.3
- Septic fields very limited
- 75% of land · state 82%
- Subject to flooding
- 11% of land, any frequency · state 15%
Most common soils in Hamilton County
Share of mapped land
A county is a patchwork of many soils. These 8 cover 56% of the mapped land; 49 named soil series are mapped here in all.
| Soil | Share of land | Drainage | Topsoil pH |
|---|---|---|---|
| Fullerton | 16.7% | Well drained | 5.3 |
| Bodine | 11.2% | Somewhat excessively drained | 4.6 |
| Lily | 6.1% | Well drained | 4.6 |
| Gilpin | 4.8% | Well drained | 4.7 |
| Urban landLand type, not a soil series | 4.7% | — | — |
| Minor componentsGeneral soil group, not a named series | 4.1% | — | — |
| Colbert | 4.0% | Moderately well drained | 5.5 |
| Ramsey | 3.9% | Somewhat excessively drained | 5.0 |
What this means
What the soils in Hamilton County mean for gardens, lawns and septic systems
For your garden
Typical topsoil in Hamilton County is very strongly acidic: pH 5.0 (most land between 4.6 and 5.6). Most vegetables and lawn grasses do best around 6.0 to 7.0, so lime is often needed; blueberries, azaleas and rhododendrons like it as it is.
Loamy topsoil (loam, silt loam and similar) covers 85% of the land: generally the easiest soil to garden, holding moisture without staying waterlogged. The most common surface texture is gravelly silt loam (32% of the land).
85% of the land is moderately well to excessively drained, which suits most garden plants.
For your lawn and yard
Most land is in hydrologic groups B and C, where rain soaks in at a moderate pace.
For a septic system
For conventional septic absorption fields, NRCS rates 75% of the land in Hamilton County very limited, 13% somewhat limited and <1% not limited (12% not rated, such as urban land, pits or water).
Statewide, 82% of the land is very limited, so Hamilton County is less restrictive than typical.
Where the soil is very limited (slow permeability, a high water table, flooding, shallow bedrock or steep slopes), alternative systems such as mound or sand-filter designs are common and cost more.
Flooding is mapped on 11% of the land (8% occasional, <1% frequent).
Only a licensed site evaluation or perc test at the actual lot decides whether a system is allowed and which design.
Drainage
How long the soil stays wet
The most common drainage class is well drained (59%). 85% of the land is moderately well drained or better, compared with 85% across Tennessee.
Show as a table
| Category | Hamilton County | Tennessee |
|---|---|---|
| Excessively drained | 0.0% | 2.0% |
| Somewhat excessively drained | 15.1% | 11.6% |
| Well drained | 58.7% | 57.1% |
| Moderately well drained | 11.1% | 14.7% |
| Somewhat poorly drained | 1.9% | 4.5% |
| Poorly drained | 0.5% | 4.2% |
| Very poorly drained | 0.0% | 0.1% |
| Not rated | 12.6% | 5.9% |
Septic absorption fields
NRCS rating for conventional drain fields
The rating looks at the soil from 24 to 60 inches deep: permeability, depth to a seasonal water table or bedrock, flooding and slope. “Very limited” means at least one feature is unfavorable enough that a conventional field is hard to make work.
Show as a table
| Category | Hamilton County | Tennessee |
|---|---|---|
| Not limited | 0.5% | 0.1% |
| Somewhat limited | 12.9% | 12.7% |
| Very limited | 75.0% | 81.9% |
| Not rated | 11.6% | 5.3% |
Rain, runoff and water table
Hydrologic soil group, flooding, seasonal water table
Hydrologic soil group
How fast rain soaks in when the soil is already wet. Group A soaks in fastest, D slowest.
Show as a table
| Category | Hamilton County | Tennessee |
|---|---|---|
| A: fast infiltration (mostly sandy or gravelly) | 15.9% | 9.9% |
| B: moderate infiltration | 39.0% | 39.3% |
| C: slow infiltration | 11.1% | 19.3% |
| D: very slow infiltration (clayey, shallow or wet) | 17.2% | 13.2% |
| A/D: D as is, A if drained | 0.0% | 0.0% |
| B/D: D as is, B if drained | 3.0% | 5.7% |
| C/D: D as is, C if drained | 3.3% | 6.4% |
| Not rated | 10.5% | 6.2% |
Flooding
Show as a table
| Category | Hamilton County | Tennessee |
|---|---|---|
| No flooding | 81.6% | 80.3% |
| Rare or very rare | 2.0% | 1.4% |
| Occasional | 8.4% | 8.5% |
| Frequent or very frequent | 0.1% | 5.0% |
| Not reported | 8.0% | 4.8% |
Seasonal high water table
Show as a table
| Category | Hamilton County | Tennessee |
|---|---|---|
| Within 18 inches at some time of year | 5.1% | 12.1% |
| 18 inches to 3.3 feet | 4.2% | 10.5% |
| Deeper than 3.3 feet or none reported | 84.5% | 73.0% |
| Not reported | 6.2% | 4.4% |
Topsoil pH and texture
First mineral layer of each soil
Typical topsoil pH is 5.0 (very strongly acidic); 80% of rated land falls between 4.6 and 5.6. Median topsoil organic matter is 1.5%.
Show as a table
| Category | Hamilton County | Tennessee |
|---|---|---|
| Strongly acidic (below 5.5) | 59.8% | 58.1% |
| Moderately to slightly acidic (5.5–6.4) | 23.5% | 26.3% |
| Near neutral (6.5–7.3) | 1.9% | 9.3% |
| Alkaline (7.4 and up) | 0.0% | 0.1% |
| Not reported | 14.8% | 6.2% |
Texture
Show as a table
| Category | Hamilton County | Tennessee |
|---|---|---|
| Sandy | 0.0% | 0.7% |
| Loamy (loam, silt loam and similar) | 85.2% | 91.8% |
| Clayey (40%+ clay) | 0.0% | 1.3% |
| Organic (muck or peat) | 0.0% | 0.0% |
| Not reported (rock, urban land, etc.) | 14.8% | 6.2% |
Sources & data dates
- Source
- USDA NRCS Soil Survey Geographic Database (SSURGO), queried through Soil Data Access. Public domain.
- Data date
- SSURGO as published on November 3, 2026 (most recent survey area update October 26, 2026). NRCS refreshes SSURGO each October.
- Scope
- Hamilton County, Tennessee (FIPS 47065): 345,000 acres of mapped land, 23,400 acres of open water excluded. State comparisons pool all mapped land in Tennessee.
- Method
- Shares are by mapped land area: each map unit’s acres in the county times each soil component’s percentage. Open water is excluded. Topsoil values use the first mineral horizon of each component. Full methodology.