Soil series profile

Marquis soil series

Marquis is a moderately well drained soil with a silt loam surface, mapped on 93,980 acres in 10 counties across 2 states. Hydrologic group C.

#3711 by mapped area fine-loamy Oxyaquic Hapludolls (Mollisols)

Drainage class: Moderately well drained
Hydrologic group: C
Typical topsoil pH: 5.8
Mapped area: 94k

Typical Marquis profile

Texture and pH by depth

Depth to scale. More strongly shaded layers hold more clay. Horizon names are the soil survey's (A = topsoil, B = subsoil, C = parent material).

Show as a table

Typical Marquis horizons (representative values)
Depth	Texture	pH	Clay	Sand	Organic matter
0–9 in (Ap)	Silt loam	5.8	22%	20%	2.9%
9–19 in (A)	Silt loam	5.5	22%	20%	2.8%
19–24 in (Bw1)	Silt loam	5.7	25%	24%	1.5%
24–32 in (2Bw2)	Loam	5.9	25%	45%	0.5%
32–42 in (2Bw3)	Loam	5.9	25%	45%	0.5%
42–54 in (2Bw4)	Loam	5.9	25%	45%	0.5%
54–79 in (2BC)	Loam	6.5	24%	44%	0.25%

Representative values from the most extensive Marquis map unit (Marquis silt loam, 2 to 6 percent slopes, survey area MN039). Other map units of this series vary within the series range.

Stock photo for illustration, not a sample of this soil series. Credit on the Sources & method page.

What this means

What Marquis soil means for gardens, lawns and septic systems

For gardens

Typical topsoil in Marquis soils is moderately acidic: pH 5.8 (most land between 5.8 and 6.5). Many vegetables grow well here, and some gardens benefit from a little lime. Test before adding any.

Loamy topsoil (loam, silt loam and similar) covers 100% of mapped Marquis acres: generally the easiest soil to garden, holding moisture without staying waterlogged. The most common surface texture is silt loam (65% of mapped Marquis acres).

100% of mapped Marquis acres is moderately well to excessively drained, which suits most garden plants.

For lawns and yards

On 100% of mapped acres, rain soaks in slowly (hydrologic groups C and D, including dual groups that are D until drained). Expect runoff and puddles after heavy rain: core-aerate compacted lawns and keep ground sloping away from foundations.

For a septic system

For conventional septic absorption fields, NRCS rates 100% of the acres in mapped Marquis soils very limited, 0% somewhat limited and 0% not limited.

Where the soil is very limited (slow permeability, a high water table, flooding, shallow bedrock or steep slopes), alternative systems such as mound or sand-filter designs are common and cost more.

Only a licensed site evaluation or perc test at the actual lot decides whether a system is allowed and which design.

Generated from the mapped numbers above using fixed rules, not a site visit. See how these notes are written.

Where Marquis soil is found

Mapped acres

Marquis is mapped in Minnesota and Iowa.

Counties with the most mapped Marquis soil
County	Acres	Share of county land
Dodge County, MN	33,462	11.9%
Black Hawk County, IA	20,564	5.7%
Goodhue County, MN	20,524	4.2%
Bremer County, IA	10,543	3.8%
Rice County, MN	7,333	2.3%
Worth County, IA	847	0.3%
Winneshiek County, IA	552	0.1%
Fayette County, IA	117	0.0%
Chickasaw County, IA	31	0.0%
Butler County, IA	7	0.0%

Septic absorption fields

NRCS rating, share of Marquis acres

Not limited 0%

Somewhat limited 0%

Very limited 100%

Septic tank absorption field rating across mapped Marquis acres. Scale 0 to 100% of mapped land.

Show as a table

Septic tank absorption field rating across mapped Marquis acres.
Category	Share of acres
Not limited	0.0%
Somewhat limited	0.0%
Very limited	100.0%

Drainage, water table and flooding

Share of Marquis acres

Depth to seasonal high water table: About 2.0 feet (24 in) (median where reported).
Flooding: Not mapped as flooding on most acres.
Slope: Typically 2–4% (median 4%).
Topsoil organic matter: Median 2.9%.

Drainage class

Excessively drained 0%

Somewhat excessively drained 0%

Well drained 0%

Moderately well drained 100%

Somewhat poorly drained 0%

Poorly drained 0%

Very poorly drained 0%

Drainage class across mapped Marquis acres. Scale 0 to 100% of mapped land.

Show as a table

Drainage class across mapped Marquis acres.
Category	Share of acres
Excessively drained	0.0%
Somewhat excessively drained	0.0%
Well drained	0.0%
Moderately well drained	100.0%
Somewhat poorly drained	0.0%
Poorly drained	0.0%
Very poorly drained	0.0%

Hydrologic soil group

A: fast infiltration (mostly sandy or gravelly) 0%

B: moderate infiltration 0%

C: slow infiltration 100%

D: very slow infiltration (clayey, shallow or wet) 0%

A/D: D as is, A if drained 0%

B/D: D as is, B if drained 0%

C/D: D as is, C if drained 0%

Hydrologic soil group across mapped Marquis acres. Scale 0 to 100% of mapped land.

Show as a table

Hydrologic soil group across mapped Marquis acres.
Category	Share of acres
A: fast infiltration (mostly sandy or gravelly)	0.0%
B: moderate infiltration	0.0%
C: slow infiltration	100.0%
D: very slow infiltration (clayey, shallow or wet)	0.0%
A/D: D as is, A if drained	0.0%
B/D: D as is, B if drained	0.0%
C/D: D as is, C if drained	0.0%

Sources & data dates

Source: USDA NRCS Soil Survey Geographic Database (SSURGO), queried through Soil Data Access. Public domain.
Data date: SSURGO as published on November 3, 2026 (most recent survey area update October 26, 2026). NRCS refreshes SSURGO each October.
Scope: All map unit components named Marquis (component kind "Series") in SSURGO: 93,980 acres.
Method: Shares are by mapped acres of Marquis components. The profile comes from the single largest Marquis component. Full methodology.

Independent reference site. No government affiliation or endorsement.

Full narrative description: USDA Official Soil Series Description for Marquis.