County soil summary
Soil types in Harford County, Maryland
The most widespread soils are Glenelg, Manor and Chester; the most common drainage class is well drained (63% of the land), and typical topsoil pH is 5.3.
- Well or moderately well drained
- 83% of land · state 70%
- Typical topsoil pH
- 5.3 strongly acidic · state 5.4
- Septic fields very limited
- 79% of land · state 85%
- Subject to flooding
- 8% of land, any frequency · state 10%
Most common soils in Harford County
Share of mapped land
A county is a patchwork of many soils. These 8 cover 61% of the mapped land; 75 named soil series are mapped here in all.
| Soil | Share of land | Drainage | Topsoil pH |
|---|---|---|---|
| Glenelg | 16.1% | Well drained | 5.4 |
| Manor | 12.8% | Well drained | 5.3 |
| Chester | 11.7% | Well drained | 5.0 |
| Neshaminy | 5.1% | Well drained | 5.4 |
| Glenville | 4.6% | Moderately well drained | 6.8 |
| Montalto | 4.6% | Well drained | 5.5 |
| Legore | 3.2% | Well drained | 5.6 |
| Codorus | 3.0% | Somewhat poorly drained | 5.3 |
What this means
What the soils in Harford County mean for gardens, lawns and septic systems
For your garden
Typical topsoil in Harford County is strongly acidic: pH 5.3 (most land between 4.6 and 6.0). Most vegetables and lawn grasses do best around 6.0 to 7.0, so lime is often needed; blueberries, azaleas and rhododendrons like it as it is.
Loamy topsoil (loam, silt loam and similar) covers 92% of the land: generally the easiest soil to garden, holding moisture without staying waterlogged. The most common surface texture is silt loam (46% of the land).
83% of the land is moderately well to excessively drained, which suits most garden plants.
For your lawn and yard
Most land is in hydrologic groups B and C, where rain soaks in at a moderate pace.
For a septic system
For conventional septic absorption fields, NRCS rates 79% of the land in Harford County very limited, 17% somewhat limited and <1% not limited (3% not rated, such as urban land, pits or water).
Statewide, 85% of the land is very limited, so Harford County is less restrictive than typical.
Where the soil is very limited (slow permeability, a high water table, flooding, shallow bedrock or steep slopes), alternative systems such as mound or sand-filter designs are common and cost more.
Flooding is mapped on 8% of the land (3% occasional, 5% frequent).
Only a licensed site evaluation or perc test at the actual lot decides whether a system is allowed and which design.
Drainage
How long the soil stays wet
The most common drainage class is well drained (63%). 83% of the land is moderately well drained or better, compared with 70% across Maryland.
Show as a table
| Category | Harford County | Maryland |
|---|---|---|
| Excessively drained | 0.0% | 1.3% |
| Somewhat excessively drained | 1.3% | 1.9% |
| Well drained | 62.7% | 48.1% |
| Moderately well drained | 18.6% | 18.2% |
| Somewhat poorly drained | 3.4% | 4.5% |
| Poorly drained | 7.9% | 12.9% |
| Very poorly drained | 2.4% | 6.3% |
| Not rated | 3.6% | 6.8% |
Septic absorption fields
NRCS rating for conventional drain fields
The rating looks at the soil from 24 to 60 inches deep: permeability, depth to a seasonal water table or bedrock, flooding and slope. “Very limited” means at least one feature is unfavorable enough that a conventional field is hard to make work.
Show as a table
| Category | Harford County | Maryland |
|---|---|---|
| Not limited | 0.6% | 0.5% |
| Somewhat limited | 17.0% | 7.6% |
| Very limited | 79.2% | 85.4% |
| Not rated | 3.2% | 6.5% |
Rain, runoff and water table
Hydrologic soil group, flooding, seasonal water table
Hydrologic soil group
How fast rain soaks in when the soil is already wet. Group A soaks in fastest, D slowest.
Show as a table
| Category | Harford County | Maryland |
|---|---|---|
| A: fast infiltration (mostly sandy or gravelly) | 1.5% | 10.9% |
| B: moderate infiltration | 54.7% | 26.7% |
| C: slow infiltration | 22.4% | 25.7% |
| D: very slow infiltration (clayey, shallow or wet) | 3.1% | 11.6% |
| A/D: D as is, A if drained | 1.1% | 4.5% |
| B/D: D as is, B if drained | 2.9% | 5.3% |
| C/D: D as is, C if drained | 11.2% | 12.8% |
| Not rated | 3.1% | 2.5% |
Flooding
Show as a table
| Category | Harford County | Maryland |
|---|---|---|
| No flooding | 88.7% | 86.8% |
| Rare or very rare | 0.1% | 0.2% |
| Occasional | 3.3% | 2.6% |
| Frequent or very frequent | 4.8% | 7.5% |
| Not reported | 3.1% | 2.9% |
Seasonal high water table
Show as a table
| Category | Harford County | Maryland |
|---|---|---|
| Within 18 inches at some time of year | 11.5% | 25.1% |
| 18 inches to 3.3 feet | 20.8% | 18.9% |
| Deeper than 3.3 feet or none reported | 64.7% | 53.1% |
| Not reported | 3.0% | 2.8% |
Topsoil pH and texture
First mineral layer of each soil
Typical topsoil pH is 5.3 (strongly acidic); 80% of rated land falls between 4.6 and 6.0. Median topsoil organic matter is 2.5%.
Show as a table
| Category | Harford County | Maryland |
|---|---|---|
| Strongly acidic (below 5.5) | 64.6% | 50.9% |
| Moderately to slightly acidic (5.5–6.4) | 24.8% | 33.6% |
| Near neutral (6.5–7.3) | 4.8% | 7.0% |
| Alkaline (7.4 and up) | 0.0% | 1.1% |
| Not reported | 5.9% | 7.5% |
Texture
Show as a table
| Category | Harford County | Maryland |
|---|---|---|
| Sandy | 1.5% | 9.5% |
| Loamy (loam, silt loam and similar) | 92.2% | 78.4% |
| Clayey (40%+ clay) | 0.0% | 0.0% |
| Organic (muck or peat) | 2.5% | 5.8% |
| Not reported (rock, urban land, etc.) | 3.8% | 6.3% |
Sources & data dates
- Source
- USDA NRCS Soil Survey Geographic Database (SSURGO), queried through Soil Data Access. Public domain.
- Data date
- SSURGO as published on November 3, 2026 (most recent survey area update October 26, 2026). NRCS refreshes SSURGO each October.
- Scope
- Harford County, Maryland (FIPS 24025): 274,153 acres of mapped land, 35,368 acres of open water excluded. State comparisons pool all mapped land in Maryland.
- Method
- Shares are by mapped land area: each map unit’s acres in the county times each soil component’s percentage. Open water is excluded. Topsoil values use the first mineral horizon of each component. Full methodology.