County soil summary
Soil types in Prince George's County, Maryland
The most widespread soils are Marr, Dodon and Beltsville; the most common drainage class is well drained (44% of the land), and typical topsoil pH is 4.7.
- Well or moderately well drained
- 70% of land · state 70%
- Typical topsoil pH
- 4.7 very strongly acidic · state 5.4
- Septic fields very limited
- 76% of land · state 85%
- Subject to flooding
- 9% of land, any frequency · state 10%
Most common soils in Prince George's County
Share of mapped land
A county is a patchwork of many soils. These 8 cover 55% of the mapped land; 71 named soil series are mapped here in all.
| Soil | Share of land | Drainage | Topsoil pH |
|---|---|---|---|
| Urban landLand type, not a soil series | 11.1% | — | — |
| Marr | 9.5% | Well drained | 5.1 |
| Dodon | 7.6% | Moderately well drained | 4.9 |
| Beltsville | 6.8% | Moderately well drained | 4.2 |
| UdorthentsGeneral soil group, not a named series | 6.5% | — | — |
| CroomGeneral soil group, not a named series | 5.2% | — | — |
| Collington | 4.6% | Well drained | 4.7 |
| Christiana | 3.8% | Moderately well drained | 4.3 |
What this means
What the soils in Prince George's County mean for gardens, lawns and septic systems
For your garden
Typical topsoil in Prince George's County is very strongly acidic: pH 4.7 (most land between 4.2 and 5.5). Most vegetables and lawn grasses do best around 6.0 to 7.0, so lime is often needed; blueberries, azaleas and rhododendrons like it as it is.
Loamy topsoil (loam, silt loam and similar) covers 71% of the land: generally the easiest soil to garden, holding moisture without staying waterlogged. The most common surface texture is fine sandy loam (29% of the land).
70% of the land is moderately well to excessively drained, which suits most garden plants.
For your lawn and yard
On 63% of the land, rain soaks in slowly (hydrologic groups C and D, including dual groups that are D until drained). Expect runoff and puddles after heavy rain: core-aerate compacted lawns and keep ground sloping away from foundations.
For a septic system
For conventional septic absorption fields, NRCS rates 76% of the land in Prince George's County very limited, 4% somewhat limited and 0% not limited (20% not rated, such as urban land, pits or water).
Statewide, 85% of the land is very limited, so Prince George's County is less restrictive than typical.
Where the soil is very limited (slow permeability, a high water table, flooding, shallow bedrock or steep slopes), alternative systems such as mound or sand-filter designs are common and cost more.
Flooding is mapped on 9% of the land (3% occasional, 6% frequent).
Only a licensed site evaluation or perc test at the actual lot decides whether a system is allowed and which design.
Drainage
How long the soil stays wet
The most common drainage class is well drained (44%). 70% of the land is moderately well drained or better, compared with 70% across Maryland.
Show as a table
| Category | Prince George's County | Maryland |
|---|---|---|
| Excessively drained | 0.8% | 1.3% |
| Somewhat excessively drained | 0.4% | 1.9% |
| Well drained | 44.0% | 48.1% |
| Moderately well drained | 24.7% | 18.2% |
| Somewhat poorly drained | 7.4% | 4.5% |
| Poorly drained | 6.9% | 12.9% |
| Very poorly drained | 1.3% | 6.3% |
| Not rated | 14.5% | 6.8% |
Septic absorption fields
NRCS rating for conventional drain fields
The rating looks at the soil from 24 to 60 inches deep: permeability, depth to a seasonal water table or bedrock, flooding and slope. “Very limited” means at least one feature is unfavorable enough that a conventional field is hard to make work.
Show as a table
| Category | Prince George's County | Maryland |
|---|---|---|
| Not limited | 0.0% | 0.5% |
| Somewhat limited | 3.7% | 7.6% |
| Very limited | 75.9% | 85.4% |
| Not rated | 20.3% | 6.5% |
Rain, runoff and water table
Hydrologic soil group, flooding, seasonal water table
Hydrologic soil group
How fast rain soaks in when the soil is already wet. Group A soaks in fastest, D slowest.
Show as a table
| Category | Prince George's County | Maryland |
|---|---|---|
| A: fast infiltration (mostly sandy or gravelly) | 11.0% | 10.9% |
| B: moderate infiltration | 21.4% | 26.7% |
| C: slow infiltration | 34.2% | 25.7% |
| D: very slow infiltration (clayey, shallow or wet) | 18.0% | 11.6% |
| A/D: D as is, A if drained | 0.0% | 4.5% |
| B/D: D as is, B if drained | 6.2% | 5.3% |
| C/D: D as is, C if drained | 4.3% | 12.8% |
| Not rated | 4.9% | 2.5% |
Flooding
Show as a table
| Category | Prince George's County | Maryland |
|---|---|---|
| No flooding | 87.4% | 86.8% |
| Rare or very rare | 0.1% | 0.2% |
| Occasional | 3.4% | 2.6% |
| Frequent or very frequent | 5.9% | 7.5% |
| Not reported | 3.1% | 2.9% |
Seasonal high water table
Show as a table
| Category | Prince George's County | Maryland |
|---|---|---|
| Within 18 inches at some time of year | 15.5% | 25.1% |
| 18 inches to 3.3 feet | 26.0% | 18.9% |
| Deeper than 3.3 feet or none reported | 55.4% | 53.1% |
| Not reported | 3.1% | 2.8% |
Topsoil pH and texture
First mineral layer of each soil
Typical topsoil pH is 4.7 (very strongly acidic); 80% of rated land falls between 4.2 and 5.5. Median topsoil organic matter is 4%.
Show as a table
| Category | Prince George's County | Maryland |
|---|---|---|
| Strongly acidic (below 5.5) | 71.6% | 50.9% |
| Moderately to slightly acidic (5.5–6.4) | 7.0% | 33.6% |
| Near neutral (6.5–7.3) | 1.2% | 7.0% |
| Alkaline (7.4 and up) | 0.0% | 1.1% |
| Not reported | 20.2% | 7.5% |
Texture
Show as a table
| Category | Prince George's County | Maryland |
|---|---|---|
| Sandy | 9.0% | 9.5% |
| Loamy (loam, silt loam and similar) | 70.5% | 78.4% |
| Clayey (40%+ clay) | 0.0% | 0.0% |
| Organic (muck or peat) | 0.3% | 5.8% |
| Not reported (rock, urban land, etc.) | 20.2% | 6.3% |
Sources & data dates
- Source
- USDA NRCS Soil Survey Geographic Database (SSURGO), queried through Soil Data Access. Public domain.
- Data date
- SSURGO as published on November 3, 2026 (most recent survey area update October 26, 2026). NRCS refreshes SSURGO each October.
- Scope
- Prince George's County, Maryland (FIPS 24033): 307,078 acres of mapped land, 9,474 acres of open water excluded. State comparisons pool all mapped land in Maryland.
- Method
- Shares are by mapped land area: each map unit’s acres in the county times each soil component’s percentage. Open water is excluded. Topsoil values use the first mineral horizon of each component. Full methodology.