Mountview soil series

What this means

What Mountview soil means for gardens, lawns and septic systems

For gardens

Typical topsoil in Mountview soils is very strongly acidic: pH 5.0 (most land between 5.0 and 5.9). Most vegetables and lawn grasses do best around 6.0 to 7.0, so lime is often needed; blueberries, azaleas and rhododendrons like it as it is.

Loamy topsoil (loam, silt loam and similar) covers 98% of mapped Mountview acres: generally the easiest soil to garden, holding moisture without staying waterlogged. The most common surface texture is silt loam (97% of mapped Mountview acres).

>99% of mapped Mountview acres is moderately well to excessively drained, which suits most garden plants.

For lawns and yards

On 56% of mapped acres, rain soaks in slowly (hydrologic groups C and D, including dual groups that are D until drained). Expect runoff and puddles after heavy rain: core-aerate compacted lawns and keep ground sloping away from foundations.

For a septic system

For conventional septic absorption fields, NRCS rates 56% of the acres in mapped Mountview soils very limited, 41% somewhat limited and 0% not limited (3% not rated, such as urban land, pits or water).

Where the soil is very limited (slow permeability, a high water table, flooding, shallow bedrock or steep slopes), alternative systems such as mound or sand-filter designs are common and cost more.

Only a licensed site evaluation or perc test at the actual lot decides whether a system is allowed and which design.

Generated from the mapped numbers above using fixed rules, not a site visit. See how these notes are written.