Soil series profile

Georgeville soil series

Georgeville is a well drained soil with a silty clay loam surface, mapped on 1,422,918 acres in 62 counties across 5 states. Hydrologic group B.

#88 by mapped area fine Typic Kanhapludults (Ultisols)

Drainage class
Well drained
100% of mapped acres
Hydrologic group
B
98% of mapped acres
Typical topsoil pH
5.5
strongly acidic · range 4.8–5.9
Mapped area
1.4M
acres in 62 counties, 5 states

Typical Georgeville profile

Texture and pH by depth

Typical Georgeville soil profile by depth 0 in 20 in 40 in 60 in 0–7 in · Ap · pH 5.9 · 31% clay Silty clay loam 7–60 in · Bt · pH 5.0 · 50% clay Clay 60–80 in · C · pH 5.0 · 28% clay Silty clay loam
Depth to scale. More strongly shaded layers hold more clay. Horizon names are the soil survey's (A = topsoil, B = subsoil, C = parent material).
Show as a table
Typical Georgeville horizons (representative values)
Depth Texture pH Clay Sand Organic matter
0–7 in (Ap) Silty clay loam 5.9 31% 18% 0.25%
7–60 in (Bt) Clay 5.0 50% 22% 0.25%
60–80 in (C) Silty clay loam 5.0 28% 18% 0.25%

Representative values from the most extensive Georgeville map unit (Georgeville silty clay loam, 2 to 8 percent slopes, moderately eroded, survey area NC151). Other map units of this series vary within the series range.

Hands holding dark garden soil
Stock photo for illustration, not a sample of this soil series. Credit on the Sources & method page.

What this means

What Georgeville soil means for gardens, lawns and septic systems

For gardens

Typical topsoil in Georgeville soils is strongly acidic: pH 5.5 (most land between 4.8 and 5.9). Most vegetables and lawn grasses do best around 6.0 to 7.0, so lime is often needed; blueberries, azaleas and rhododendrons like it as it is.

Loamy topsoil (loam, silt loam and similar) covers 100% of mapped Georgeville acres: generally the easiest soil to garden, holding moisture without staying waterlogged. The most common surface texture is silt loam (51% of mapped Georgeville acres).

100% of mapped Georgeville acres is moderately well to excessively drained, which suits most garden plants.

For lawns and yards

Most land is in hydrologic groups B and C, where rain soaks in at a moderate pace.

For a septic system

For conventional septic absorption fields, NRCS rates 11% of the acres in mapped Georgeville soils very limited, 89% somewhat limited and 0% not limited.

Only a licensed site evaluation or perc test at the actual lot decides whether a system is allowed and which design.

Generated from the mapped numbers above using fixed rules, not a site visit. See how these notes are written.

Where Georgeville soil is found

Mapped acres

Georgeville is mapped in North Carolina, South Carolina, Georgia, Virginia and Alabama. The 60 counties with the most Georgeville acres:

Counties with the most mapped Georgeville soil
County Acres Share of county land
Randolph County, NC 148,006 31.2%
Chatham County, NC 77,394 21.0%
Wilkes County, GA 75,119 26.6%
Orange County, NC 73,395 29.5%
Saluda County, SC 58,393 20.8%
Nash County, NC 55,092 16.9%
Granville County, NC 53,612 16.1%
York County, SC 42,616 9.8%
Lunenburg County, VA 42,346 18.0%
Lincoln County, GA 40,214 29.5%
Richland County, SC 39,842 8.4%
Mecklenburg County, VA 39,761 11.4%
Montgomery County, NC 37,540 12.7%
Person County, NC 36,933 15.5%
Lancaster County, SC 35,875 10.2%
Edgefield County, SC 35,169 11.2%
McDuffie County, GA 34,360 20.9%
Moore County, NC 32,125 8.0%
McCormick County, SC 31,688 14.1%
Davidson County, NC 31,464 9.6%
Fairfield County, SC 31,022 8.2%
Warren County, GA 27,890 15.4%
Dinwiddie County, VA 27,493 9.2%
Greenwood County, SC 22,533 8.4%
Charlotte County, VA 22,511 8.8%
Oglethorpe County, GA 22,315 8.3%
Franklin County, NC 19,286 6.3%
Lexington County, SC 19,148 4.3%
Hancock County, GA 17,265 5.7%
Richmond County, NC 16,856 6.1%
Taliaferro County, GA 16,345 13.1%
Campbell County, VA 16,022 5.3%
Lynchburg city, VA 16,022 5.3%
Durham County, NC 13,267 7.5%
Stanly County, NC 12,066 5.5%
Newberry County, SC 11,904 3.5%
Columbia County, GA 11,560 6.3%
Kershaw County, SC 10,729 2.3%
Brunswick County, VA 10,284 3.1%
Lincoln County, NC 7,336 4.2%
Chesterfield County, SC 6,402 1.3%
Union County, NC 4,966 1.4%
Warren County, NC 4,714 1.8%
Amelia County, VA 4,391 2.1%
Vance County, NC 4,141 2.7%
Halifax County, VA 3,966 0.9%
Greensville County, VA 3,254 2.1%
Mecklenburg County, NC 2,685 0.8%
Prince Edward County, VA 2,334 1.2%
Cabarrus County, NC 2,097 1.0%
Richmond County, GA 2,039 1.0%
Wake County, NC 1,776 0.3%
Anson County, NC 1,525 0.5%
Greene County, GA 1,138 0.5%
Goochland County, VA 974 0.6%
Sussex County, VA 868 0.3%
Johnston County, NC 773 0.2%
Nottoway County, VA 693 0.4%
Hanover County, VA 400 0.2%
Cherokee County, SC 379 0.2%

Septic absorption fields

NRCS rating, share of Georgeville acres

Not limited 0%
Somewhat limited 89%
Very limited 11%
Septic tank absorption field rating across mapped Georgeville acres. Scale 0 to 100% of mapped land.
Show as a table
Septic tank absorption field rating across mapped Georgeville acres.
CategoryShare of acres
Not limited0.0%
Somewhat limited88.8%
Very limited11.2%

Drainage, water table and flooding

Share of Georgeville acres

Depth to seasonal high water table
None reported within about 6.5 feet (median where reported).
Flooding
Not mapped as flooding on most acres.
Slope
Typically 4–13% (median 5%).
Topsoil organic matter
Median 1%.

Drainage class

Excessively drained 0%
Somewhat excessively drained 0%
Well drained 100%
Moderately well drained 0%
Somewhat poorly drained 0%
Poorly drained 0%
Very poorly drained 0%
Drainage class across mapped Georgeville acres. Scale 0 to 100% of mapped land.
Show as a table
Drainage class across mapped Georgeville acres.
CategoryShare of acres
Excessively drained0.0%
Somewhat excessively drained0.0%
Well drained100.0%
Moderately well drained0.0%
Somewhat poorly drained0.0%
Poorly drained0.0%
Very poorly drained0.0%

Hydrologic soil group

A: fast infiltration (mostly sandy or gravelly) 0%
B: moderate infiltration 98%
C: slow infiltration 3%
D: very slow infiltration (clayey, shallow or wet) 0%
A/D: D as is, A if drained 0%
B/D: D as is, B if drained 0%
C/D: D as is, C if drained 0%
Hydrologic soil group across mapped Georgeville acres. Scale 0 to 100% of mapped land.
Show as a table
Hydrologic soil group across mapped Georgeville acres.
CategoryShare of acres
A: fast infiltration (mostly sandy or gravelly)0.0%
B: moderate infiltration97.5%
C: slow infiltration2.5%
D: very slow infiltration (clayey, shallow or wet)0.0%
A/D: D as is, A if drained0.0%
B/D: D as is, B if drained0.0%
C/D: D as is, C if drained0.0%

Sources & data dates

Source
USDA NRCS Soil Survey Geographic Database (SSURGO), queried through Soil Data Access. Public domain.
Data date
SSURGO as published on November 3, 2026 (most recent survey area update October 26, 2026). NRCS refreshes SSURGO each October.
Scope
All map unit components named Georgeville (component kind "Series") in SSURGO: 1,422,918 acres.
Method
Shares are by mapped acres of Georgeville components. The profile comes from the single largest Georgeville component. Full methodology.

Independent reference site. No government affiliation or endorsement.

Full narrative description: USDA Official Soil Series Description for Georgeville.