Soil series profile

Ogle soil series

Ogle is a well drained soil with a silt loam surface, mapped on 44,587 acres in 8 counties across 2 states. Hydrologic group B.

#6459 by mapped area fine-silty Typic Argiudolls (Mollisols)

Drainage class
Well drained
100% of mapped acres
Hydrologic group
B
100% of mapped acres
Typical topsoil pH
6.3
slightly acidic · range 5.8–6.3
Mapped area
45k
acres in 8 counties, 2 states

Typical Ogle profile

Texture and pH by depth

Typical Ogle soil profile by depth 0 in 20 in 40 in 60 in 0–11 in · A · pH 6.3 · 24% clay Silt loam 11–33 in · Bt · pH 5.6 · 31% clay Silty clay loam 33–80 in · 2Bt · pH 5.8 · 32% clay Clay loam
Depth to scale. More strongly shaded layers hold more clay. Horizon names are the soil survey's (A = topsoil, B = subsoil, C = parent material).
Show as a table
Typical Ogle horizons (representative values)
Depth Texture pH Clay Sand Organic matter
0–11 in (A) Silt loam 6.3 24% 3% 4%
11–33 in (Bt) Silty clay loam 5.6 31% 3% 0.5%
33–80 in (2Bt) Clay loam 5.8 32% 35% 0.25%

Representative values from the most extensive Ogle map unit (Ogle silt loam, 2 to 5 percent slopes, survey area IL201). Other map units of this series vary within the series range.

Hands holding dark garden soil
Stock photo for illustration, not a sample of this soil series. Credit on the Sources & method page.

What this means

What Ogle soil means for gardens, lawns and septic systems

For gardens

Typical topsoil in Ogle soils is slightly acidic: pH 6.3 (most land between 5.8 and 6.3), the range most vegetables, flowers and lawn grasses prefer.

Loamy topsoil (loam, silt loam and similar) covers 100% of mapped Ogle acres: generally the easiest soil to garden, holding moisture without staying waterlogged. The most common surface texture is silt loam (100% of mapped Ogle acres).

100% of mapped Ogle acres is moderately well to excessively drained, which suits most garden plants.

For lawns and yards

Most land is in hydrologic groups B and C, where rain soaks in at a moderate pace.

For a septic system

For conventional septic absorption fields, NRCS rates 0% of the acres in mapped Ogle soils very limited, 100% somewhat limited and 0% not limited.

Only a licensed site evaluation or perc test at the actual lot decides whether a system is allowed and which design.

Generated from the mapped numbers above using fixed rules, not a site visit. See how these notes are written.

Where Ogle soil is found

Mapped acres

Ogle is mapped in Illinois and Wisconsin.

Counties with the most mapped Ogle soil
County Acres Share of county land
Winnebago County, IL 12,125 3.9%
Ogle County, IL 11,565 2.4%
Rock County, WI 10,001 2.2%
Stephenson County, IL 5,307 1.5%
Green County, WI 1,682 0.5%
Boone County, IL 1,681 1.0%
Whiteside County, IL 1,536 0.4%
Carroll County, IL 690 0.2%

Septic absorption fields

NRCS rating, share of Ogle acres

Not limited 0%
Somewhat limited 100%
Very limited 0%
Septic tank absorption field rating across mapped Ogle acres. Scale 0 to 100% of mapped land.
Show as a table
Septic tank absorption field rating across mapped Ogle acres.
CategoryShare of acres
Not limited0.0%
Somewhat limited100.0%
Very limited0.0%

Drainage, water table and flooding

Share of Ogle acres

Depth to seasonal high water table
About 5.8 feet (69 in) (median where reported).
Flooding
Not mapped as flooding on most acres.
Slope
Typically 4–4% (median 4%).
Topsoil organic matter
Median 4%.

Drainage class

Excessively drained 0%
Somewhat excessively drained 0%
Well drained 100%
Moderately well drained 0%
Somewhat poorly drained 0%
Poorly drained 0%
Very poorly drained 0%
Drainage class across mapped Ogle acres. Scale 0 to 100% of mapped land.
Show as a table
Drainage class across mapped Ogle acres.
CategoryShare of acres
Excessively drained0.0%
Somewhat excessively drained0.0%
Well drained100.0%
Moderately well drained0.0%
Somewhat poorly drained0.0%
Poorly drained0.0%
Very poorly drained0.0%

Hydrologic soil group

A: fast infiltration (mostly sandy or gravelly) 0%
B: moderate infiltration 100%
C: slow infiltration 0%
D: very slow infiltration (clayey, shallow or wet) 0%
A/D: D as is, A if drained 0%
B/D: D as is, B if drained 0%
C/D: D as is, C if drained 0%
Hydrologic soil group across mapped Ogle acres. Scale 0 to 100% of mapped land.
Show as a table
Hydrologic soil group across mapped Ogle acres.
CategoryShare of acres
A: fast infiltration (mostly sandy or gravelly)0.0%
B: moderate infiltration100.0%
C: slow infiltration0.0%
D: very slow infiltration (clayey, shallow or wet)0.0%
A/D: D as is, A if drained0.0%
B/D: D as is, B if drained0.0%
C/D: D as is, C if drained0.0%

Sources & data dates

Source
USDA NRCS Soil Survey Geographic Database (SSURGO), queried through Soil Data Access. Public domain.
Data date
SSURGO as published on November 3, 2026 (most recent survey area update October 26, 2026). NRCS refreshes SSURGO each October.
Scope
All map unit components named Ogle (component kind "Series") in SSURGO: 44,587 acres.
Method
Shares are by mapped acres of Ogle components. The profile comes from the single largest Ogle component. Full methodology.

Independent reference site. No government affiliation or endorsement.

Full narrative description: USDA Official Soil Series Description for Ogle.