Ellsworth soil series

What this means

What Ellsworth soil means for gardens, lawns and septic systems

For gardens

Typical topsoil in Ellsworth soils is very strongly acidic: pH 4.6. Most vegetables and lawn grasses do best around 6.0 to 7.0, so lime is often needed; blueberries, azaleas and rhododendrons like it as it is.

Loamy topsoil (loam, silt loam and similar) covers 99% of mapped Ellsworth acres: generally the easiest soil to garden, holding moisture without staying waterlogged. The most common surface texture is silt loam (99% of mapped Ellsworth acres).

>99% of mapped Ellsworth acres is moderately well to excessively drained, which suits most garden plants.

For lawns and yards

On 99% of mapped acres, rain soaks in slowly (hydrologic groups C and D, including dual groups that are D until drained). Expect runoff and puddles after heavy rain: core-aerate compacted lawns and keep ground sloping away from foundations.

A seasonal high water table comes within 18 inches of the surface on 99% of mapped acres, often in spring. Basements, sump pumps and lawns in low spots feel it first.

For a septic system

For conventional septic absorption fields, NRCS rates 99% of the acres in mapped Ellsworth soils very limited, 0% somewhat limited and 0% not limited (1% not rated, such as urban land, pits or water).

Where the soil is very limited (slow permeability, a high water table, flooding, shallow bedrock or steep slopes), alternative systems such as mound or sand-filter designs are common and cost more.

Only a licensed site evaluation or perc test at the actual lot decides whether a system is allowed and which design.

Generated from the mapped numbers above using fixed rules, not a site visit. See how these notes are written.